Beurer ME 90, Инструкция по эксплуатации

Страница: 30 / 44

30
5. Taking measurements
1
.
There are three different methods of taking the measurement. Start with measurement
method A, “right index finger–chest”. If this method does not deliver measurements, or
delivers only unstable measurements (“EE” is frequently displayed), switch to method B
“left index finger–chest” and, if necessary, to method C “left hand–right hand”.
The most suitable method/procedure depends on the heart configuration (shape of the
heart) of each individual user. If it is not possible to take stable measurements using a given
measurement method, this could have a harmless cause such as the shape of the heart.
However, the cause may also be an illness or disease.
Note: measurement method C offers maximum comfort, but offers a much lower
measurement stability than methods A or B.
2
.
Press the on/off button for about three seconds to turn the device on. The device shows
the full display.
Warning
If segments are missing, stop using the device and immediately contact customer services.
To test whether the full display is completely displayed, hold the On/Off button when
switching on the device.
Measurement
method A
“right index finger-chest”
(approximately corresponds to “lead 2”)
Top Electrodes
Place your right index finger on the two upper electrodes on the de-
vice and hold the device vertically in your hand.