Beurer BGL40, Инструкция по эксплуатации

Страница: 21 / 52

Beurer BGL40 mg/dL 19
4.2 Making basic settings
1
The monitor must be switched off.
Press the 'SET' button.
The year display starts blinking.
2
Setting date and time
Note
•
It is vital to set the date and time. Only in this
way is it possible to save and subsequently
retrieve your measured values with the right
date and time.
•
Time is shown in 12 hour format. Times before
12 midday are AM. Times after 12 midday are
PM. Example:
'PM 1:00 ' for13:00 hours.
Set the year (calendar up to 2049) by pressing the ‘M’ button.
Press the 'SET' button.
The month display starts blinking.
Proceed in the same way for month, day, hour and minute.
3
Setting blood pressure unit
Press the 'M' button to switch between mmHg and kPa. Press
the 'SET' button. The temperature unit starts blinking.
4
Setting temperature unit
Press the 'M' button to switch between °C and °F. Press the
'SET' button.