20
Beurer GL50
Labelling the measurement
You have the following options for labelling measured values:
Before meal
After meal
General labelling (e.g. after exercising).
Labelling measured values enables you, your GP or your diabetes consultant to better monitor your
blood glucose values. For example, you can display the average values of all measurements taken
before a meal.
To do this, proceed as follows:
1
The measured value can be labelled as soon as it is displayed. Once the value disappears from
the display, it can no longer be labelled.
2
Press the "–" rocker switch repeatedly.
• Pressing once adds the label “Before meals”.
• Pressing again adds the label “After meals”.
• Pressing a third time adds the label “General label”.
• Pressing a fourth time removes the label.
3
The selected label is stored in the memory of the device when it is switched off.
5.5. Post-processing and disposal
1
Remove test strip
Remove the test strip from the device and carefully dispose of it in
accordance with the applicable regulations to avoid infecting others.
2
Remove the cap
Carefully remove the cap from the lancing device.
