12
Beurer GL50
3.5 test strips
Front
Rear
1
2
3
1 Gap for blood input
2 Grip area
3 Contacts
You can identify the rear by the contact tracks.
Insert the test strip into the device so
that the contacts are pointing inside
the slot.
Make sure that the front of the test
strip is facing you.
Note
Carefully read the following information on handling and storing your test strips. The test strips will
only provide accurate measurements if all information is followed.
Warning
Use each test strip only
once
and only for
one
patient!
Handling test strips
Note
• Securely close the test strip box immediately after taking out a test strip.
• Do not use the test strips if they have expired. The use of expired test strips may lead to incorrect
measurements. The expiry date is located next to the hourglass symbol on the box or on the
respective film packaging of the individual test strips.
• The test strips expire 18 months after the box is opened; note down the expiry date (date of opening
plus 18 months
18 M
) on the label. In the event of overlap, the shelf life is limited to the expiry date
(see date next to the hourglass symbol ). This does not apply for individual test strips, which are
to be used immediately after opening the film packaging.
