Bettis P/N 137462E
Revision
"A”
Page 4 of 18
1.6 LUBRICATION
REQUIREMENTS
1.6.1
The actuator should be re-lubricated at the beginning of each service interval using
the following recommended lubricants.
NOTE: Lubricants other than those listed in steps 1.6.2 should not be used without prior written
approval of Bettis Product Engineering.
1.6.2
All temperature services (-50°F to +350°F)/(-45.5°C to 176.6°C) use Bettis ESL-5
lubricant. ESL-5 lubricant is contained in the Bettis Module Service Kit in tubes and the
tubes are marked ESL-4,5 & 10 lubricant.
1.7
GENERAL TOOL INFORMATION
1.7.1 All threads on CBA series actuators are Inch Unified and NPT.
1.7.2 All tools/Hexagons are American Standard inch.
1.7.3 Suggested tools: Two adjustable wrenches, small standard screwdriver with sharp
edges rounded off, medium size standard screwdriver, external snap ring pliers, drive
ratchet / deepwell socket set and torque wrench (up to 3,000 inch pounds / 339 N-m).
1.8 ACTUATOR
WEIGHT
ACTUATOR APPROXIMATE
ACTUATOR APPROXIMATE
MODEL WEIGHT
(1)
MODEL WEIGHT
(1)
LB KG
LB KG
CBA730 130
59
CBA930 155
70.4
CBA730-M3 131
59.4
CBA930-M3 158
71.7
CBA730-M3HW 131.5 59.6
CBA930-M3HW 158.5 71.9
CBA830 140
63.5
CBA1030 170
77.1
CBA830-M3 143
64.9
CBA1030-M3 173
78.5
CBA830-M3HW 143.5 65.1
CBA1030-M3HW
173.5 78.7
NOTES:
(1) Weight is for bare actuator without accessories or valve adaptation.
