Bettis P/N 137462E
Revision
"A”
Page 3 of 18
1.2 DEFINITIONS
WARNING:
If not observed, user incurs a high risk of severe damage to actuator
and/or fatal injury to personnel.
CAUTION:
If not observed, user may incur damage to actuator and/or injury to
personnel.
NOTE:
Advisory and information comments provided to assist maintenance
personnel to carry out maintenance procedures.
M3:
Jackscrew or jackscrew assembly.
ES:
Extended Stop(s)
1.3
GENERAL SAFETY INFORMATION
1.3.1
Products supplied by Bettis, in its "as shipped" condition, are intrinsically safe if the
instructions contained within this Service Instruction are strictly adhered to and executed by
well trained, equipped, prepared and competent personnel.
WARNING: For the protection of personnel working on Bettis actuators, this
procedure should be reviewed and implemented for safe disassembly and
reassembly. Close attention should be noted to the WARNINGS,
CAUTIONS and NOTES contained in this procedure.
WARNING: This procedure should not supersede or replace any customer’s plant
safety or work procedures. If a conflict arises between this procedure and
the customer’s procedures the differences should be resolved in writing
between an authorized customers representative and an authorized Bettis
representative.
1.4
BETTIS REFERENCE MATERIALS
1.4.1
CBA300 Assembly Drawing use part number 129742.
1.4.2
CBA300-M3HW Assembly Drawing use part number 129744.
1.5
SERVICE SUPPORT ITEMS
1.5.1 Bettis
Service
Kit.
1.5.2
Commercial leak testing solution.
1.5.3 Non-hardening
thread
sealant.
