Bettersafe Guard Angel, Руководство по установке

Страница: 17 / 26

Installation Manual
October 2015: Rev 1.0
NOTE: Wherever possible the starting point for all installations should be the corners,
remembering to carry out the initial setting out a minimum distance of 2m from the edge of
the roof.
Step 1 - Corner assembly
Begin by assembling a complete corner unit consisting of two uprights, two
sweeping 90 deg bends and two handrail tubes cut to length.
Cut two handrail tubes down to form two tubes at 1200mm and two at 1300mm.
Take the one upright, Insert one 1200mm tube into the top of the Top riser coupler and
one 1300mm tube into the bottom of the top riser coupler, fully tightening the screws
as you do so. Repeat the process for connecting the cut tubes to the SUP.
Join the upright assemblies using two sweeping bends ensuring that all the screws are fully
tightened.
Using two people carry the corner assembly to the roof edge, being careful to remain
behind the assembly at all times.
Fix the base plate to the profile sheet using the standing seam clamps.
INSTALLATION
Top Fix Edge Protection - System Configuration