English - 3
PARTS
A) Container cover
B) Juice Container
C) Motor assembly
D) Power cord
(under motor assembly)
E) Large citrus juicing cone
(place over top of small citrus juicing cone)
F) Small citrus juicing cone
G) Upper pulp strainer portion
H) Lower pulp strainer portion
Note: Small citrus cone (F), upper pulp
strainer (G) and lower pulp strainer (H) snap
together to make a single juicing assembly.
INSTRUCTIONS FOR USE
1) Your juicer has a pressure sensitive on-off
switch. To begin, cut fruit in half. Press sliced
side of fruit onto juicing cone (large or small
depending on diameter of fruit. The cone
will begin to turn thereby expressing juice.
Release pressure to stop juicer. Pressing
down again will cause motor to reverse,
thereby expressing more juice. Repeat as
necessary to express maximum juice yield.
2) Once container is filled to desired
amount, remove juicing assembly (F,G,H)
from top of juice container. Turn juicing con-
tainer counter-clockwise to unlock from
base and lift off motor assembly. Pour and
enjoy! Replace when done.
CLEANING INSTRUCTIONS
When finished, disassemble and wipe motor
assembly down with a warm soapy wash-
cloth. Towel dry. For all other parts, you can
immerse in warm, soapy water. Rinse in
plain tap water, then dry.
CAUTION: DO NOT IMMERSE MOTOR
ASSEMBLY.
IM-502CJ & 505CJ Manual 2/14/12 11:42 AM Page 3
