Betonblock CL60, Руководство по эксплуатации

Страница: 13 / 16

Concrete Block Clamp – BETONBLOCK® ‐ 13
GEBRUIKSAANWIJZING

Figure 8 Attaching the Concrete Block Clamp to the
lifting device
1 Lifting beam
2 Pin
3 Safety chain, locking pin and locking bolt
4 Bearing ring
5 Locking pin
Crane:

Lower the hook of the crane just above the Concrete Block Clamp;

Couple up the hook to the Concrete Block Clamp;

Lift the whole Clamp unit upwards.
Now the Concrete Block Clamp is ready for work.
IN OPERATION
Never allow any persons to be within the range of the machine, while working
with the Concrete Block Clamp.
If needed, warn people beforehand!
Before the combined truck with Concrete Block Clamp can be operated/driven, the following
needs to be checked:
-
Please check if all bolts, nuts and pins are fixed properly;
-
Please check if the locking pin (if applicable) is solidly in place;
-
Please check the rubber surface reliefs in the clamps for defects. Replace them if they are
damaged;
-
Please check general technical state;
-
Please test if the locking mechanism of the Concrete Block Clamp works properly; irregular
noises could indicate a defect;
-
Avoid speeding at all times. Make sure to drive extra slow in bends and curves.