Betersport DP-7022UA, Руководство пользователя

Страница: 13 / 22

13
Functions and Features:
1. Quick Start key: Allows you to start the computer without selecting a program. TIME automatically
begins to count up from zero. Use the UP and DOWN keys to adjust the resistance.
2. TIME: Shows your elapsed workout time in minutes and seconds. Your computer will
automatically count up from 0:00 to 99:59 in one second intervals. You can also program your
computer to count down from a set value by using the UP and DOWN keys. If you continue
exercising once the time has reached 0:00, the computer will begin beeping, and reset itself to the
original time set, letting you know your workout is done.
3. DISTANCE: Displays the accumulative distance traveled during each workout up to a maximum of
99.9KM/MILE.
4. RPM: Your pedal cadence.
5. WATT: The amount of mechanical power the computer is receiving from your exercise.
6. SPEED: Displays your workout speed value in KM/MILE per hour.
7. CALORIES: Your computer will estimate the cumulative calories burned at any given time during
your workout.
8. PULSE: Your computer displays your pulse rate in beats per minute during your workout.
9. AGE: Your computer is age-programmable from 10 to 99 years. If you do not set an age, this
function will always default to age 35.
10. TARGET HEART RATE (TARGET PULSE): The heart rate you should maintain is called your
Target Hear Rate in beats per minute.
11. PULSE RECOVERY: During the START stage, leave the hands holding on grips or leave the
chest transmitter attached and then press “PULSE RECOVERY” key, all function displays will stop
except “TIME”. Time starts counting from 00:60 - 00:59 - - to 00:00. As soon as 00:00 is reached,
the computer will show your heart rate recovery status with the grade F1.0 to F6.0.
1.0 means OUTSTANDING
1.0
＜
＜ ＜
＜
F
＜
＜ ＜
＜
2.0 means EXCELLENT
2.0
≦≦≦≦
F
≦≦≦≦
2.9 means GOOD
3.0
≦≦≦≦
F
≦≦≦≦
3.9 means FAIR
4.0
≦≦≦≦
F
≦≦≦≦
5.9 means BELOW AVERAGE
6.0 means POOR
Note: If no pulse signal input then the computer will show “P” on the PULSE window. If the
computer shows “ERR” on the message window, please re-press the PULSE RECOVERY key and
please make sure your hands are keeping well on the grips or the chest transmitter is attached
well.
Key function:
There are 6 button keys and the function description as follows:
1. START/STOP key:
a. Quick Start key function: Allows you to start the computer without selecting a program. Manual
workout only. Time automatically begins to count up from zero
b. During the exercise mode, press the key to STOP exercise.
c. During the stop mode, press the key to START exercise.
2. UP key:
a. Press the key to increase the resistance during exercise mode.
b. During the setting mode, press the key to increase the value of Time, Distance, Calories, Age and