ENGLISH
PLEASE READ ALL OF THE
INSTRUCTIONS BEFORE USE
Your Digital
€
uro Coin Sorter has two power systems. One
operates the sorting mechanism and the second operates the
electronic digital display. The sorter requires a 3-volt AC Adaptor
(included)
OR
2 x C (LR14) batteries (not included) and 2 x AAA
(LR03) batteries (included).
1. To use your AC adaptor, locate the metal jack on the back of the
bank. Connect the plug end of the adaptor cord into the metal
jack and then plug the adaptor into a standard wall socket.
OR
To insert 2 x C (LR14) batteries, lift off the COIN HOPPER and
insert 2 x C (LR14) batteries into the battery compartment. Be
sure to match the "+" and "-" polarity markings. (See Figure 1)
2. To insert 2 x AAA (LR03) batteries, lift off the COIN HOPPER.
Over digital LCD unit battery base is in the top section alongside
the C cells. Insert 2 x AAA (LR03) batteries into the battery
compartment. Be sure to match the "+" and "-" polarity markings.
(See Figure 1) The display will show
€
0.00. (If this does not
happen, hold the reset (R) button for two seconds until
€
0.00
appears.) Replace the HOPPER.
1. Always operate the sorter on a flat level surface.
2. Switch on the sorter by pressing the ON/OFF switch on the top
right corner of the sorter.
3. Gradually pour up to 20 coins into the COIN HOPPER at one time.
Coins will sort and fill the COIN TUBES.
4. If the COIN TUBES become full, the extra coins will divert to the
OVERFLOW TRAY at the back. (NOTE: All coins in overflow tray have
been counted by the LCD counter… See Digital Display Functions.)
5. Press the switch to turn off the sorter.
IMPORTANT:
DO NOT unplug the AC Adaptor while in use.
BASIC OPERATION
Figure 1
2 x C (LR14) batteries
(not included)
2 x AAA (LR03)
batteries (included)
ECS-Proff-Anleitung.pdf 15.09.2004 14:20 Uhr Seite 8
