ENGLISH
REMOVING THE COIN TUBES
WRAPPING THE COINS
Fill coins into preformed
wrappers
(BETEC Part-No. 3701)
or roll coins
in
conventional paper. (See Figure 5)
(NOTE: Preformed wrappers
not included.)
The coin sorter tubes are designed to hold the amount of coins stated
on each tube. (See Figure 6 ) When you open the COIN TUBE DRAWER
some coins may spill into the OVERFLOW TRAY. If coins inadvertently
spill inside the COIN TUBE DRAWER, remove the COIN TUBES and tilt
IMPORTANT
Figure 2
Figure 3
ON/OFF switch
COIN HOPPER
LCD COUNTER
DISPLAY
COIN TUBES
OVERFLOW TRAY
Figure 4
COIN TUBE DRAWER
Figure 5
AC ADAPTOR
METAL JACK
One special feature of the “Digital
€
URO Coin Sorter Bank” is the
COIN TUBES. To load or unload the COIN TUBES:
1. Make sure you switch off the sorter, then gently slide out the
COIN TUBE DRAWER by pulling on the FINGER SLOT in front
of the bank. (See Figure 4 )
NOTE:
Do not
force the drawer
beyond the stop or
Damage may occur!
2. Remove the desired COIN TUBES,
empty and replace. Make sure you
replace all of the COIN TUBES
before sorting more coins.
3. Push back the COIN TUBE TRAY
into the bank and you are ready to
start again.
ECS-Proff-Anleitung.pdf 15.09.2004 14:20 Uhr Seite 9
