BETCO STEALTH ASO20BT, Руководство оператора и каталог запасных частей, Страница: 6 / 27

10 11
11. INSTRUMENT PANEL COMPONENTS
The instrument panel components are identified as follows:
1. Levers to activate pad / traction (located beneath the handlebar)
2. ON/OFF key switch
3. Battery level / hour-counter display
4. Traction speed control knob
5. Eco-mode button
12. REAR COMPONENTS
The rear components are identified as follows:
6. Foot pedal to raise the brushes
7. Water / solution level hose
8. Drain hose with recovery tank cap
9. Latch to close the tanks
10. Compartment storage
11. Lever to raise the squeegee
12. Solution filter
13. Solution control valve
13. SIDE COMPONENTS
The side components are identified as follows:
14. Handle to raise the recovery tank
15. Parking brake lever
16. Handle to raise the vacuum unit
17. Upper storage compartment
18. Solution tank fill inlet
14. ASSEMBLING THE SQUEEGEE
For packaging reasons, the squeegee is supplied dismounted from the machine,
and must be assembled as follows:
A. Insert the two small pins of the squeegee in the appropriate holes on the
squeegee yoke.
B. Insert the two cotter pins chained to the squeegee shoe.
C. Attach the squeegee vacuum hose over the squeegee shoe adapter.
14. ASSEMBLING THE SQUEEGEE
For packaging reasons, the squeegee is supplied dismounted from the machine,
and must be assembled as follows:
1. Close the recovery tank
2. Secure the recovery tank with the latch
3. Loosen the knobs (3) on the squeegee body
4. Insert the left squeegee pin into the left slot (4), tighten the knob (3), ensur-
ing that the washer (5) and spring are on the upper part of the squeegee
body.
4. Insert the right squeegee pin into the right slot (6), tighten the knob (3),
ensuring that the washer (7) and spring are on the upper part of the squeegee
body.
5. Insert the vacuum hose (8) onto the the squeegee vacuum port (9).
15. ADJUSTING THE SQUEEGEE HEIGHT
The height of the squeegee must be adjusted based on wear of the squeegee
blade. To do this, turn the knobs counter clockwise to raise the squeegee, and
clockwise to lower it.
Note: The right and left wheels must be adjusted to the same level, so the
squeegee can work parallel to the floo r.
MACHINE PREPARATION MACHINE PREPARATION