BETCO STEALTH ASO20BT, Руководство оператора и каталог запасных частей, Страница: 10 / 27

18 19
3. CLEANING THE SQUEEGEE
To clean:
A. Take the machine to a safe location on flat ground and ensure that the device is in a safe condition.
B. Close the lid using the handle (1).
C. Secure the recovery tank latch (2).
D. Remove the vacuum hose (3) from the vacuum hose port (4).
E. Loosen the knobs (5) from the squeegee assembly and remove it from the machine.
F. Using a hose and cloth, thoroughly clean the squeegee assembly body (6).
G. Using a hose and cloth, thoroughly clean the front squeegee blade (7) and the rear squeegee blade (8).
H. Inspect the squeegee blades and replace them if the edges are worn.
I. Remove the vacuum hose port knobs (9) and clean inside the vacuum hose port (4) including the mating face on the squeegee assembly.
WARNING: Always wear gloves when doing this operation to protect yourself from contact with hazardous chemicals.
4. REPLACING THE SQUEEGEE BLADES
Check the wear of the squeegee blades and, if necessary, replace them.
To replace them:
A. Follow the instructions in "Cleaning the Squeegee" section to remove the squeegee assembly.
B. Turn the wing nuts (1) that hold the front squeegee pressing blades (2) on the squeegee assembly.
C. Remove the front squeegee pressing blades (2) and the front squeegee (3) from the assembly.
D. Turn the wing nuts (4) that hold the rear squeegee pressing blades (5) on the squeegee assembly.
E. Remove the rear squeegee pressing blades (5) and the rear squeegee (6) from the assembly.
F. Reverse these instructions to reinstall the new squeegee blades.
WARNING: Always wear gloves when doing this operation to protect yourself from
contact with hazardous chemicals.
DAILY MAINTENANCE
1. CLEANING THE SQUEEGEE HOSE
Every week, or whenever vacuum seems to be unsatisfactory, check the squee-
gee hose for obstructions. To clean it:
A. Remove the vacuum hose from the squeegee shoe adapter on the squeegee
shoe.
B. Wash the inside of the hose with water.
C. Drain and clean the recovery tank after cleaning the hose.
D. Reassemble the hose.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
2. CHECKING THE BRAKE
Every week, check the distance between the work brake pads and the wheels. If
necessary, adjust so they are at a distance of 0.12 in (3 mm) when released.
3. CLEANING THE SOLUTION TANK
A. Remove the solution tank cap.
B. Rinse with water.
C. Remove the drain cap ( 1 ) located on the filter, and empty the tank.
WARNING: Always wear gloves when doing this operation to pro-
tect yourself from contact with hazardous chemicals.
WEEKLY MAINTENANCE