14
11. Troubleshooting Guide
Product or chemical does not dispense.
1. Make sure the water is on.
2. Make sure the water inlet hose is not kinked or crimped.
Only water is being dispensed.
1. Make sure there is product in the concentrate bottle.
2. Make sure there is at least 20 PSI pressure to draw product.
3. Remove cover. Did any tubes become dislodged or damaged? If so, reconnect or replace tubing
as needed.
Dispenser is leaking.
1. Make sure dispenser is not accidentally left on.
2. Is water pressure greater than 80 PSI? If so, install a pressure regulator.
3. If leaking occurs at specific connection points, replace fitting and connectors.
Excessive foam when filling spray bottles.
1. Make sure there is product in the concentrate bottle.
2. Place the bottle fill hose farther down in bottle. By placing the hose farther down into the bottle,
less foam will result.
3. Make sure all connections are secure.
Excessive foam when filling mop buckets/automatic scrubbers.
1. Make sure there is product in the concentrate bottle.
2. Make sure all connections are secure.
