Betamotor EVO 4t, Руководство по ремонту, Страница: 56 / 80

50
ASSEMBLY
betamotor.com
A
4.10 KICKSTART
4.10.1 Preassembly of kickstart shaft
Clamp the kickstart shaft (2) with the serrated end
facing downwards and fit the kickstart sleeve (3)
from above, applying molycote grease to the spli-
ned section.
Fit the spring (4) and the 20x30x0.5 thrust washer
(5), securing them with the circlip (6).
N.B. Take care that the sleeve is fitted in such a way
that the relative position of the hole (A) for securing
the return spring (11) is as shown in the drawing.
Position the kickstart shaft (2) with the serrated end
facing upwards, and fit the thrust washer 16x25x0.5
(7), the caged roller bearing (8), the gear (9) with
the side ratchet side facing downwards, and the
16x25x0.5 thrust washer (10).
Fit the return spring (11), securing the end in the
hole provided (A), and fit the spacer with the recess
for the spring facing downwards.
Fit the ramp (14) with two M6x20 bolts. Tighten the
bolts to 8 Nm after first applying thread lock to the
threads.
Threadlocker Blue