Betamotor EVO 4t, Руководство по ремонту, Страница: 15 / 80

9
LUBRICATION CIRCUIT
betamotor.com
1.2 CHECKING THE ENGINE OIL LEVEL
The engine oil level must be checked when the en-
gine is warm. Run the engine for several minutes
and then switch it off. Place the bike on a flat surfa-
ce in such a way that it is perfectly vertical.
Wait a few minutes and then check the oil level in
the sightglass located in the clutch casing (right-
hand side of the engine). The level must be betwe-
en the limits indicated in the picture.
If necessary, remove the oil filler plug and top up
the level.
N.B. Running the engine with too little oil causes ex-
cessive wear to the engine components.
1.3 CHANGING THE ENGINE OIL
N.B. At each oil change, the mesh filters must be cle-
aned and the paper filter replaced.
N.B. The oil change must be carried out when the
engine is at working temperature. Be careful not to
scald yourself with the hot oil.
After the engine has reached operating temperatu-
re, switch the bike off and stand it upright.
Unscrew the oil drainplug and let all the oil flow out
into a drain pan. Thoroughly clean the magnet on
the drainplug to get rid of the metallic impurities
that it has collected.
MAX
MIN