manualshive.com logo in svg

Beta ALP 4.0, Руководство по обслуживанию

Поделиться
Скачать
Beta ALP 4.0 Скачать руководство пользователя страница 13

1

GENERAL INFORMA

TION

92

GB

KEYS AND LOCKS

The vehicle is supplied with two keys and the related spares for the ignition switch/
steering lock and the crash helmet lock.

WARNING
Do not keep the spare keys in the vehicle. Keep the keys in a safe and easy-to-reach
place. The code number stamped on the keys should be copied on this manual (or
elsewhere) so it can be used to ask for duplicates should both keys be lost.

OFF:

Electrical equipment disabled.

ON:

The vehicle can be started.

LOCK:

Steering lock on.
To lock the handlebar, turn it to
the left, press the key, rotate it
anticlockwise all the way and
then release it.

CRASH HELMET LOCK

Insert the key into the lock located on the left side under the saddle, and then rotate
it anticlockwise to open the crash helmet hook.

IGNITION SWITCH/STEERING LOCK

It controls the ignition circuit and the steering lock.

ON

OFF

LOCK

Содержание ALP 4.0


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды