Beta Three TQ-18, Справочное руководство

Страница: 22 / 64

-14-
UG-TQ18-EN (V2.2-211226)
TQ-18
Mixer Reference
manual
2.1.4 Parametric equalization ( PEQ )
TQ-18 equipped every MIC /Line In channel with 4 bands PEQ and High/Low Pass filter, Among
which BAND1 and BAND4 can select normal filter or High/ Low shelf Filter
03 Scene button, click to enter scene control page, save
or load the scene parameters you need. It has the same
function as the button on the panel.
04 Home button, click to return to the channel home
page.
06 Click to switch to the noise gate control page.
05 Click to switch to the PEQ control page. 08 Click to switch to the copy control page.
07 Click to switch to the compressor control page. 10 Click to switch to the channel setting page.
09 Click to switch to the parameter preset page. 12 Frequency scale of PEQ filter, unit: Hz.
11 Click to switch to the channel overview page. 14 HPF switch. The filter is active when lit.
13
PEQ filter gain scale, unit: dB.
16
Frequency curve of the currently selected filter.
15 EQ curve and filter point, click on a band point, press drag to adjust the filter frequency and gain. The dotted circle
represents the current frequency band, the right list shows the parameters, click or slide to select the parameter to be
adjusted (displayed as green text when selected), you can use the main knob to change the value. Press the main
knob to switch between coarse and fine adjustment modes. Use the two-finger gesture to adjust the width. In the
main unit, use two semi-circular color blocks. Press the horizontal push-pull to adjust the width.
Double-click the selected band point to reset the filter gain to zero.
17 PEQ Switch. The equalizer is active when lit. 18 Filter type selection, when BAND1 and
BAND4, can choose ordinary filter or high / low
shelf filter. When the high / low-pass filter is
selected, the type and order of the filter can be
selected.
19 Reset all parameters of the EQ to a flat state.
21 EQ para. display area. The para. with colored borders
are the current editing filter points. Click on the
parameter area or swipe up and down in the parameter
area to select the parameter to be adjusted, and then
use the main knob to make precise adjustments.
20 LPF switch. The filter is active when lit.
22 Current channel master control board, adjustable
gain and mute.
03 02 01
04
16 13
11
09
21 12
08
10
20 22 15 14 19 18
07
17
05
06