Beta Three TQ-18, Справочное руководство

Страница: 15 / 64

UG-TQ18-EN (V2.2-211226) - 7 -
TQ-18
Mixer Reference
manua
1.3. Tip wizard for quick start
You can have a quick start
1).
Connect TQ-18 mixer with Mics, Music instruments, amps etc.
2).
Turn on the power of TQ-18, wait for start of the unit, normally it will take around 25
seconds.
3).
In the navigation zone
，
you can select the input /output channels
，
single click enter setup menu, or you can click the fade pages
button
，
then click button to enter the setup the channel. Then you
can click
【
Config
】，
and adjust the analog gain
，
or adjust with the gain knob on
the left
，
check the channel level and make sure it is within the right level, you can click
【
Solo
】
t
o monitor
，
to know about the level of input.
Note: GATE, COMP and EQ / HPF / LPF function will probably effect the input level,or
even lead to dramatically decay of input signal.
4).
Same way to setup other input channels, single click other can setup other channels,
or you can use
【
Copy to
】
function to paste the specifications to other channels rapidly
5).
Single click the key or
【
Back
】
of menu to return to overview of channels
，
put the
volume fader to right level, normally it`s 0dB, single click
【
MUTE
】
button to cancel the
channel MUTE.
6).
Under Default mode, the input channel signal will go through Main L / R as output, you can
adjust the volume to right level, and MUTE off, then you can hear the sound.
7).
If you choose mix output as BUS output, single click on the mixer
，
now the mixer is under status of
routing setup, the input channels which can be used as routing will be shown with brown
color, you only need to adjust the volume of the input channels, the effect sent volume will
also setup here.
8).
Single click again will quit the
routing setup mode.