Beta Layout Reflow, Инструкция по эксплуатации

Страница: 12 / 16

Instruction Manual
Reflow-Controller
Page 10 of 14
7.7. Commands
The Reflow CONTROLLER recognizes the following commands:
help Lists all commands
Arrow keys Shows the allocation of the control keys
tempshow Temperature displayed each second [from 0 to desired
frequency in seconds]
tempshow 5 <enter>
The current temperature is displayed every 5 seconds.
tempshow 0<enter>
Current temperature will not be displayed.
Temperature will be displayed in the format; seconds,
+xxx, degC. e.g. 31, +058, 52°C.
Data is separated by a comma.
This data, if stored on the operating system, can later be
uploaded to a spreadsheet e.g. Excel *.csv format.
If a command is given without parameters then the
current temperature is only displayed once.
debug Show Debug information [parameter 0 or 1]
Internal status information is displayed.
trace Internal status information [Parameter 0 or 1]
Program's internal status is displayed.
settings Gives a list of all set parameters.