Bestway PRO-MOUNT 360 Скачать руководство пользователя страница 14

Страница: 14 / 91

SAFETY INFORMATION

As the manufacturer of your BESTWAY Pro-Mount sprayer, we care about your safety. In fact,

this machine and its systems have been designed to provide maximum safety. Unfortunately, no

machine design can prevent operator error or carelessness.

This operator’s manual provides instructions for the safe operation and maintenance of your

Bestway Sprayer. Please read and understand this and all other manuals included in your owner’s

packet before operating the machine.

Chemical Safety

•

Handle all agricultural chemicals with care as required by the chemical manufacturer’s

recommendations. This includes, but is not limited to, the following safety precautions.

•

Do not spray chemicals when the wind is in excess of the label recommendations.

•

Never allow chemical to contact the skin

or eyes.

•

Wear approved protective equipment and

clothing. This equipment includes, but is

not limited to, a protective hat, goggles

or face shield, chemical resistant gloves,

long sleeved shirt, long pants, and a

chemical resistant apron.

•

Keep in mind that the cab filter may not

filter out dangerous chemicals. Follow

instructions provided by the chemical manufacturer.

Keep personal wash

tank full of clean

water for emergencies

and rinse purposes.

Personal wash spigot

Содержание PRO-MOUNT 360




























































































Результаты поиска

Содержание PRO-MOUNT 360

Отзывы:

Похожие инструкции для PRO-MOUNT 360

Бренды по названию

Популярные бренды

Bestway PRO-MOUNT 360, Руководство оператора

Результаты поиска

Содержание PRO-MOUNT 360

Отзывы:

Похожие инструкции для PRO-MOUNT 360

Бренды по названию

Популярные бренды