Bestway PRO-MOUNT 360 Скачать руководство пользователя страница 33

Страница: 33 / 91

Adding and Mixing Chemicals

Although chemicals can be added directly to the main tank through the hinged tank lid, the

sprayer has been equipped with a chemical induction system for quick loading and thorough mix-

ing. To add and mix chemicals in the tank:

1. Fill main sprayer tank with desired amount of clean water.

2. Make sure agitator valve is fully open and that the pump supply valve is set to spray. There

is also an emergency shut off valve at the tank sump that must be fully open.

3. Activate tractor remote valve to engage the pump. Make certain that gauge on the front of

the sprayer indicates that the plumbing has been pressurized. Do not continue to operate the pump

is pressure is not indicated immediately.

4. Remove inductor lid. Measure out and add appropriate amount of chemical as prescribed by

the product label.

Inductor

Agitation Valve,

“off” position

Pump Supply Valve,

“Spray” position

Induction Valve,

“off” position

Pump Supply Valve,

“Induct” position

Содержание PRO-MOUNT 360




























































































Результаты поиска

Содержание PRO-MOUNT 360

Отзывы:

Похожие инструкции для PRO-MOUNT 360

Бренды по названию

Популярные бренды

Bestway PRO-MOUNT 360, Руководство оператора

Результаты поиска

Содержание PRO-MOUNT 360

Отзывы:

Похожие инструкции для PRO-MOUNT 360

Бренды по названию

Популярные бренды