Bestway 6942138972177 страница 10 Скачать руководство пользователя

Страница: 10 / 64

Pre-Installation Checklist

• The pool must be set up on a completely flat and level

surface. Please do not install the pool if the surface is
inclined or sloped.

• The selected location must be capable of uniformly

supporting the weight for the entire time the pool is
installed with water, moreover the location must be flat,
must be cleared of all objects and debris including
stones and twigs.

• The pool must be away from any objects children could

use to climb into the pool.

• Position the pool near an adequate drainage system to

deal with overflow or to discharge the pool. We

recommend picking a location that is at least 20

' away

from your home.

Incorrect conditions to set up the pool:

• On uneven ground the pool may collapse causing

serious personal injury and/or damage to personal
property and will void the warranty and prevent any
service claims.

• Sand should not be used to create a level base; the

ground must be dug out if necessary.

• Directly under overhead power lines or trees. Be sure

the location does not contain underground utility pipes,

lines orcables of any kind.

• Do not set up the pool on driveways, decks, platforms,

gravel or asphalt surfaces. The selected location should
be firm enough to withstand the pressure of the water;
Mud, sand, soft / loose soil or tar are not suitable.

• Grass or other vegetation under the pool will die and

may cause odors and slime to develop, therefore we
recommend removing all grass from the selected pool
location.

• Avoid areas prone to aggressive plant and weed

species that may grow through the liner.

Pre-installation:

Bestway will not be responsible for damage caused to the
pool due to mishandling or failure to follow these
instructions.

1. Lay out all parts and check that you have the correct

quantities as listed in the components list. For
assistance or FAQs, please visit the support

section on our website, www.bestwaycorp.com.

2. Spread out the pool and make sure the pool is right

side up, let it sit exposed to direct sunlight for 1 hour or
more so that the pool is more flexible during set up.

3. Place the pool near an adequate drainage system to

deal with overflow water and ensure the pool’s inlet A
and outlet B are correctly positioned to allow your filter
pump to connect to a power source.

NOTES:

• Do not use extension power cords to power your pump.
• Do not drag the pool on the ground, this can damage

the pool.

• Check with your local city council for by-laws relating to

fencing, barriers, lighting and safety requirements and
ensure you comply with all laws.

• If have a filter pump, refer to the pump’s manual for

instructions.

The ladder must match the pool size and should to be
used only for entering and exiting the pool. It is forbidden

to exceed the permitted payload of the ladder. Check

regularly if the ladder is properly assembled.

Pool Outlet Strainer
Filtro de saída da piscina
Tamiz de salida de la piscina
Poolauslass-Sieböffnung
Altaan lähtösiivilä
Waterafvoerzeef
Filtro uscita piscina

Crépine de sortie de piscine

ΣΗΤΑ ΕΞΟΔΟΥ ΠΙΣΙΝΑΣ

Сетчатый фильтр сливного

отверстия

Sitko odpływu basenu

Medencekimeneti szűrő

Poolens utloppssil

NOTE:

Some parts already have been installed on the pool.

NOTA:

Algumas peças já foram instaladas na piscina.

NOTA: