background image

TrekStep Side-Mount™ – Installation Instructions

Rev. A 0312

75407 / 75408 pg. 4

Insert the Top Bracket into the end of the bed rib.

Use an M10-1.5 Nylock Nut and an M10 Flat 
Washer to secure the Frame Mount to the Top 
Bracket.

Install Top Bracket  

Secure Frame Mount to Bed 

All Models 
Except 2011 – Current Driver’s Side

All Models 
Except 2002 – 2008 1500 6.4

'

 Bed

Thread an M10-1.5 x 45mm Hex Bolt with an M10 
Split Lock Washer through the Adjustable Side 
Bracket and the outside hole on the Frame Mount 
Foot.

Secure Adjustable Side Bracket 
to the Frame Mount Foot

If there was a nut and plate that was 
removed in Step 1, you will not   need to 

install a Top Bracket.

2011 – Current Drivers Side: Install an 
M12-1.75 x 30mm Hex Bolt with an M12 

Flat Washer into the tapped hole in the rib.  

Line up the holes of the two (2) Adjustable Side 
Brackets as shown. Secure them with two (2) 
M8-1.25 x 20mm Hex Head Screws and M8-1.25 
Nylock Nuts. Leave the nuts loose to adjust as 
necessary to fi t your vehicle.

Assemble Adjustable 
Side Brackets

M8 Hex 
Screws

M8 Nylock 
Nuts

Bed Rib

Top Bracket

Frame 
Mount

Top Bracket 
Stud

Frame 
Mount

M10-1.5 Nylock Nut 
and M10 Flat Washer

2011 – Current Drivers Side: 
M12-1.75 x 30mm Hex Bolt 
with M12 Flat Washer

Frame Mount 
Foot

Adjustable 
Side Bracket

M10-1.5 x 45mm 
Hex Bolt with M10 
Split Lock Washer

Содержание TrekStep Side-Mount









Отзывы: