Rev. D 0711
54722 pg. 5
Supertop NX Installation Instructions
Mount Side Bows to Rear Bow
Locate the Center Bow Assembly. Place it on the
Side Bow/Header Assembly so that the fabric stay
pads on the corners go toward the rear.
Install an M5 x 30 Machine Screw with two (2)
Bushings and an M5 Lock Nut.
Assemble Center Bow to
Header / Side Bow Assembly
Side Bow
Center Bow
M5 x 30
Machine Screw
Bushings
M5 Lock
Nut
Locate the left and right Side Bows and orient them with the pivot knuckle knobs to the outside.
Mount them to the Rear Bow with a #8 x 1/2" Self Tapping Screw on each side.
Do Not allow Stay Pad
to twist.
Place the Rear Bow Assembly with the Header/
Center Bow Assembly. Pull the end of the fabric
stay pad to the corner of the Rear Bow. Install
three (3) #8 x 1/2" Pan Head Washer Screws.
Install Stay Pad
Rear
Bow
#8 x 1/2" Self
Tapping Screw
