Pet Barrier – Installation Instructions
Rev. F 0114
42503 pg. 2
M8 Lock Nut (Nyloc
Nut), Qty - 2
Parts List and Hardware Identifi cation
M6 Lock Nut,
Qty - 8
M6 Washer,
Qty - 18
M8 Washer,
Qty - 4
Soft Top Only
M6 Spring
Washer,
Qty - 2
Upper Partition,
Qty - 1
Lower Partition,
Qty - 1
Use a T-30 torx to remove the screw from the outside
plastic seat rail cover. Discard the screw. Repeat on
both sides of the vehicle.
For easiest installation, remove the rear
seat prior to installing the Pet Barrier.
Loosen Plastic Seat Rail Cover
M6 x 35mm Button Head Screw, Qty - 4
M6 x 16mm Button Head Screw, Qty - 2
M6 x 25mm Button Head Screw, Qty - 6
M8 x 35mm Hex Bolt, Qty - 2
M6 x 15 Thumbscrew, Part
Number 495.60, Qty - 4
M6 x 20 Thumbscrew, Part
Number 495.61, Qty - 2
Left Middle
Bracket, Qty - 1
Right Middle
Bracket, Qty - 1
Upper Connecting
Bracket, Qty - 2
Upper Mounting
Bracket, Qty - 2
Lower Mounting
Bracket, Qty - 2
Lower Connecting
Bracket, Qty - 2
Passenger Side Shown
Seat
Seat Rail Cover
