BestDuplicator BD18xxL Controller, Руководство пользователя

Страница: 42 / 48

Appendix
42
D. Steps to avoid drives problems.
1 To avoid dust and over-heat temperature.
Overtime, drives and fans tend to build up in dust which could cause slower
burning performances. It is suggested that the unit is placed in an area with the
least amount of dust. It's also suggested that every 6 months the unit should be
"Air dusted". This means you will need to open the side of the case and spray
air dust into the drives or fans to clean the dust. **DO NOT AIR DUST THE
POWER SUPPLY**
READER
Feel better now!
After closing the side cover,
the air circulation would flow
from the front to the back.
Without the side cover, it
will reduce the effect of
heat cooling.
Heat
Heat
The pattern of heat releasing keeps drawing
air from the front to the back.
15cm
If the distance is too short, it will cause
heat-releasing failed.
Duplicator Tower
Wall
Wall
Duplicator Tower
Cooler
Cooler Drive 1
Drive 2
Drive 1
Drive 2
Heat Heat
Space
would
allow air
circulation.
If no space, it
would fail to
release the
temperature.
Recycle
Components
Cause
Life
Short !!
Low Quality
Capacitor
Cause
Low
Capability
Sony
Sony
Sony
Sony
Pioneer
LG
It might cause problems of compatibility
or instablilty of copying speed if install
different brands of drivers.
2 It is very important that all of the drives that the duplicator is using are the same
brand to prevent compatibility and stability issues.(Diagram on "Do & Don't 5")
Q1: How do we know the data is correct after copy?
Run function "Compare" function to ensure the corrrectness of copied data.
Q2: During Boot up my Duplicator only says 5/6 Drives
Detected.
Ocasionally due to the unit's movement in transit by the courier, cables may
become fall loose. For life and warranty purposes, BestDuplicator does not hot
glue cables into those drives for that reason. Simply open the case door and
check to make sure all cables are plugged in. Please follow Step 4 on "Part A of
FAQ Steps to replace drives"
Appendix C. Do & Don't
Do & Don't
1
Be sure to use duplicator chassis so that there are
available spaces among drives. Please do not only stack
up drives without using standard chassis.