BestDuplicator BD18xxL Controller, Руководство пользователя

Страница: 27 / 48

Chapter 4. Operation
27
8-6. Compare Speed
The reading speed of drive and disc are the reasons can affect the quality of
comparison. This setting allows you to adjust the reading speed of drives to
match up the reading speed of discs. The default setting of CD’s compare
speed is 40X, DVD is 8X.
8-7. Language
You can set a proper language for interface during operation.
8-8. Clear Setup
This setting will reset all the function back to manufacturer’s default setting.
8-9. Advanced Setup
• Power On Time: You can set a warm-up time from 5 to 99 seconds for
warming up the duplicator when it is turned on. The default setting is 10
seconds.
• Start-up Menu: You can select which function you would like to show up in
the beginning.
•
Skip Read Error: You can set this function enable to skip disc errors in order
to avoid bad quality of copy. If you are confident of your source disc has
only a small and insignificant error due to physical damages and can be
overlooked, you can set NO to disable this function.
※
Note:
Skip Read Error can not fix the error in the source disc, all
it does is skipping the errors and keeps copying the rest of
readable data.
•
Change Bad Master: This setting will make the system eject source disc and
ask for another one while the source disc is unreadable for system.
•
CD Overburn: The majority of discs have a small margin of extra groove at
the outer edge. This setting allows you to copy data over the normal size
limit.
•
Show HDD Image Name: You can select to show HDD image name or
capacity on Copy, Test, Copy&Compare and Compare function.