Best Fitness BFT50 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 44

Best Fitness BFT50 Скачать руководство пользователя страница 30

30

MainTenance

DRiVe BeLt tenSiOning

Sometimes, after extended use, adjustment of the drive belt may be necessary. To tighten

the drive belt, turn the adjustment bolts clockwise.

Motor Belt adjustment method:

1.

Loosen M8 Nuts (71) by turning them counterclockwise.

The position of Drive Motor (40) is now readjustable.

2.

Loosen Allen Head Bolt (78) by rotating counterclockwise for ¼ turn and tighten

Allen Head Bolt (52) by rotating clockwise for ¼ turn until the belt does not slip.

3.

Retighten M8 Nuts (71).

If you have tensioned the running belt and are still experiencing a slipping sensation, call

your dealer.

only an authorized dealer should perform tensioning of the drive belt.

NoTe: over tightening of the drive belt will severely shorten the life of the belt and may

cause further damage to other components!

Damage caused by severely overtightening the belt is not covered under warranty.

To reduce the risk of electrical shock, always unplug the treadmill from the electrical

outlet immediately after use and before maintenance!

tight

loosen

tight

loosen

Tighten

tight

loosen

tight

loosen

loosen

tight

loosen

tight

loosen

Tighten

tight

loosen

tight

loosen

loosen

tight

loosen

tight

loosen

52

78

71

40

«
...
28
29
30
31
32
...
»

Содержание BFT50













































Отзывы:

Нет отзывов