Best Fitness BFSB5, Руководство пользователя

Страница: 25 / 36

25
15
REPLACING THE BRAKE PAD
STEP 1.
Slacken the 2pcs of Inner hexagon column bolt M5*12L (57) by using a Inner hexagon wrench
4#.
STEP 2 . Take out the 2pcs of Inner hexagon column bolt M5*12L (57) and 2 pcs of
)ODWZDVKHUž
DQGWKHEUDNHDVVHPEO\GHWDLOHGLQVWHS
STEP 3
. Hold the Cap nut (54) by a wrench, at the same time slacken the 2 pcs of Cross recessed pan
head bolt M5*18L(56) by using a cross screwdriver, then you can take out the 2 pcs of Cross recessed pan
head bolt M5*18L(56), 2 pcs of flat washer
ž
8*
ž
16*2T (58), cowhide brake pad (15), Brake soft mat
(16), and the Cap nut M5 (54).
STEP 4 . Clean the Brake holder (32), then spread the glue on the Brake holder, and follow the figure
below, stick the new Brake soft mat (16) on the brake holder, and then stick the new cowhide brake pad
(15) on the other side of Brake soft mat (16), and lock up the Cross recessed pan head bolt M5*18L(56)
by using a cross screwdriver while holding the Cap nut (54) with the a wrench, and press out the brake
pad (15) to make sure it is completely glued.
15
REPLACING THE BRAKE PAD
STEP 1.
Slacken the 2pcs of Inner hexagon column bolt M5*12L (57) by using a Inner hexagon wrench
4#.
STEP 2. Take out the 2pcs of Inner hexagon column bolt M5*12L (57) and 2 pcs of
)ODWZDVKHUž
DQGWKHEUDNHDVVHPEO\GHWDLOHGLQVWHS
STEP 3. Hold the Cap nut (54) by a wrench, at the same time slacken the 2 pcs of Cross recessed pan
head bolt M5*18L(56) by using a cross screwdriver, then you can take out the 2 pcs of Cross recessed pan
head bolt M5*18L(56), 2 pcs of flat washer
ž
8*
ž
16*2T (58), cowhide brake pad (15), Brake soft mat
(16), and the Cap nut M5 (54).
STEP 4. Clean the Brake holder (32), then spread the glue on the Brake holder, and follow the figure
below, stick the new Brake soft mat (16) on the brake holder, and then stick the new cowhide brake pad
(15) on the other side of Brake soft mat (16), and lock up the Cross recessed pan head bolt M5*18L(56)
by using a cross screwdriver while holding the Cap nut (54) with the a wrench, and press out the brake
pad (15) to make sure it is completely glued.
15
REPLACING THE BRAKE PAD
STEP 1.
Slacken the 2pcs of Inner hexagon column bolt M5*12L (57) by using a Inner hexagon wrench
4#.
STEP 2. Take out the 2pcs of Inner hexagon column bolt M5*12L (57) and 2 pcs of
)ODWZDVKHUž
DQGWKHEUDNHDVVHPEO\GHWDLOHGLQVWHS
STEP 3. Hold the Cap nut (54) by a wrench, at the same time slacken the 2 pcs of Cross recessed pan
head bolt M5*18L(56) by using a cross screwdriver, then you can take out the 2 pcs of Cross recessed pan
head bolt M5*18L(56), 2 pcs of flat washer
ž
8*
ž
16*2T (58), cowhide brake pad (15), Brake soft mat
(16), and the Cap nut M5 (54).
STEP 4. Clean the Brake holder (32), then spread the glue on the Brake holder, and follow the figure
below, stick the new Brake soft mat (16) on the brake holder, and then stick the new cowhide brake pad
(15) on the other side of Brake soft mat (16), and lock up the Cross recessed pan head bolt M5*18L(56)
by using a cross screwdriver while holding the Cap nut (54) with the a wrench, and press out the brake
pad (15) to make sure it is completely glued.
diagram A