Best Barns the Greenbriar, Сборочная книга

Страница: 7 / 23

2. Repeat to install 2x4s on the another gable frame.
5. Repeat to side another gable.
Siding From Kit
Step 3A Install Siding on Gables
1. Select one of the gable frames, Turn the gable over letting the bottom plate overhang
the floor so the gable lays flat.
1. Install (2) two 86-1/4" long 2x4s on the gable,
flush with the top of the gable siding.
Secure with 10d sinkers.
Step 3B Install 2x4 gable Overhang
2. Cut a siding panel 39" in length. This will be used for the center of the gable. Cut the
remaining siding panel in half for the ends of the gable.
3. Install the siding extending 1/4" below the bottom plate. Cut siding flush with the top
of the gable. Install gable siding using 6d galv. nails across the top of the gable frame.
Use 8d galv. nails along the bottom edge. Space nails 12" apart.
Siding Extends 1/4"
Below Bottom Plate
4. Install pre-cut siding on the ends of the
gable. The siding should extend 1/2"
below the 2x4 to receive the soffit when
installed later.