1.
Cut (2) two 4x8 OSB panels into (2) two 4'x6 panels. Select the 2' wide pieces and cut
them to a length of 37-1/2".
2.
Cut (2) two 1x6-7' white pine fascia boards to a length of 72". Starting at the rear of the
building, install the 1x6 fascia boards and 4x6 roof sheathing on each side, flush with the
face of the 2x4s on the back gable.
Step 15 Install 1x6 Fascia & Roof Sheathing
1x6 -6' Fascia Board
straight edge
Roof Sheathing
5.
Make sure the trusses are plumb and the roof sheathing meets the center of the truss. Install
the bottom row first. Use 7d sinkers spaced 12" apart. The top row of roof sheathing will be
about 1" below the ridge to allow for ventilation if ridge vent is used.
Important: Make sure the front gable is plumb and the roof sheathing extends 8-1/2" past
the siding along the face of the gable.
48" x 72"
48" x 48"
48" x 81-1/2"
24" Long
Panel
81-1/2" Long Panel
Sheathing Will Extend
8-1/2" Beyond Gable
37-1/2" x 96" Long Panel
Remove From Pallet
3.
Cut (2) two 1x6-7' fascia boards to 72"
and install on each side.
Install the fascia so the bottom edge of
the roof sheathing will rest on the 1x6.
Use a straight edge to aline the 1x6 boards
with the top of the trusses. Install fascia
with 8d galv. nails.
4.
Cut (2) two 4x8 panels to a width of 37-1/2". Cut a 4x8 panel in half creating
(2) two pieces 48" x 48".
Top Sheathing is 37-1/2" Wide
Содержание the Greenbriar
Страница 23: ......
