Gas Check User's Guide
1. Gas Detector Data Collection Setting
1.1. Activate gas detector by long pressing
<!)
button.
1.2. Long press OK button to function inte1face
1.3. Press up/down button and choose "Setting", enter it by sho1t pressing OK button
1.4. Press up/down button and choose "Data Store",enter it by sho1t pressing OK button
Use:
The amount of data have been collected & stored
Total:
Total amount of data can be collected & stored
Time:
Configurable time inte1val between l-600s for data collection
Stop:
Stop data collection. Sho1t press OK button to switch between "Stop" and "Sta1t", long press OK
button to confi1m.
Start:
Strut data collection. Sho1t press OK button to switch between "Stop" and "Sta1t", long press OK
button to confilm.
1.5. After well setted, user can find � on top of detecting inte1face, which means device is collecting&
sto1ing data.
Notice: when gas detector is connected with Gascheck software for real-time data collection, gas detector
data collection will be out of work.
2. Gascheck Driver and Software Installation
2.1. Open CD-Rom Driver on your computer and put the offered CD into it
2.2. Read the CD and find
Gas Check Driver
programme, then choose light file according to your computer
OS.
2.3. Double click "Prelnstaller.exe" or "CP210xVCPinstaller.exe" and click "Install", then you'll see
window prompt with "Installation Successfully".
2.4. To confilm this diiver has been installed successfully: light click "My Computer''and choose "Device
manager" and unfold "Po1t (COM and LPT)" you'll find "silicon Labs CP210x USB toUART Blidge".
2.5. Find "Gas Check Setup", install this softwai·e by double clicking this setup, follow window prompt
for installation
Notice: Before connecting gas detector with Gascheck software, please install &·iver firstly, or gas
detector can't be recognised by software.
3. Gascheck operation
3.1. Double click "Gas Check" icon on your desktop, and connect with activated gas detector using USB
cable.
3.2. Click "Connect"to connect gas detector with this software, after well connected, status will become
"Connected"and model number will come out.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
