C Run the software from Windows OS(List above)
.
1. Plug the USB cable into USB port, since you have already Installed the USB
driver, computer will automatically detect logger ,
2. Find “BST-Pro07” in START
PROGRAMS
BST Pro07
→
→
-
3.Select logger software folder.
Reminder:
Software is installed completed,”Get Datalog’s Identifier”shows as
below(pic.1), then press SETTING button to enter Log setting
(Pic.1)
(Pic.2)
P3
2. Remember the Comm port number and go back to software.
3 Click “Setting” ”Comm port “ select the port number as you see from step 1,
.
then press OK button.
NOTE:
If software message box show as Pic2. Follow the next steps.
1.click My computer
Content in hardware content,click Device manager to
“
””
”
“
”
find the listed (COMx) listed under Ports(COM & LPT as below with red line.If
you may Prolific USB-to-Serial Comm. Port , it means the logger is connected to
computer properly.
NOTE:
If logger is not plugged in USB port, the warning message
“Reminder: Data Logger is not plugged in USB port!” shows next page (pic.2)
Make sure logger is plugged in and choose the correct COM port.
