BESAFE iZi Combi X4 ISOFIX, Руководство пользователя

Страница: 391 / 395

2. Release the tow bar cover by pressing firmly on the lower end of the cover
(Figure 1). Fully insert the tow bar into the opening and rotate it until securely
fastened (Figure 2). The tow bar at the rear is installed in the same way as the
front.
3. Keep the vehicle in PARK, press the brake pedal, enter the Settings page from
the leftmost side of the control bar at the bottom of the center display, and
tap Driving > N. The vehicle will release the parking brake and enter the N
mode (to prevent sliding, use the wheel stopper accordingly).
4. Before towing, power off the vehicle and turn on the hazard warning lights to
ensure that the whole vehicle is locked and no occupant is in the vehicle.
5. Attach the tow chain to the tow bar and slowly tow the vehicle to the flatbed
truck.
6. After pulling the vehicle onto the flatbed truck, use the wheel stopper and
straps to secure the tires onto the truck.
7. Before transporting the vehicle, exit the N mode on the center display and tap
Driving > Jack Mode to maintain the suspension at the current ride height and
avoid height changes during transportation.
Caution
• The vehicle can only be towed from the site when there are no safety risks in
doing so. If the high voltage battery is deformed, leaking or emitting smoke,
address the risk posed by the high voltage battery first.
• Try restarting the 12V battery if Tow/Wash Mode cannot be turned on
normally. If the park brake cannot be released, use a tow dolly or a trailer
to transport the vehicle a short distance.
Emergency Rescue
389