BESAFE iZi Combi X4 ISOFIX, Руководство пользователя

Страница: 152 / 395

Enter Settings from the bottom left of the center display, and touch ADAS
>Automatic Emergency Brake to enable or disable the feature.
Warning
When Automatic Emergency Braking is disabled, your vehicle will not
automatically apply the brakes even if a potential frontal collision is detected.
It is not suggested to turn it off.
This feature will be turned on when the vehicle's system restarts.
Cautions and Limitations
In certain situations, the camera may fail to recognize obstacles so that
Automatic Emergency Brake may fail to function. including but not limited to:
• The position of the camera is changed.
• The camera is obstructed or stained.
• The performance of the camera is reduced at night.
• Visibility is poor in dim environment, such as at dawn, dusk, night, or in a
tunnel.
• The view of the camera is interfered by sudden changes in brightness, such as
when entering or exiting a tunnel.
• The view of the camera is interfered by large shadows cast by buildings,
landscape features, or large vehicles.
• The view of the camera is interfered by direct sunlight or other light sources.
• Visibility is poor due to rain, snow, fog, haze, and other bad weather.
• Visibility is poor due to exhaust gas, splashes, snow, or dust kicked up by
vehicles in front of you.
• The camera is obstructed by water, dust, small scratches, grease, dirt, wipers,
frost, or snow on the windshield.
• The road is wet.
• The camera cannot focus or malfunctions.
Only qualified vehicles moving in the same direction as your vehicle, cyclists,
and pedestrians will trigger Automatic Emergency Brake. Some targets are not
responded to, including but not limited to:
• Vehicles crossing perpendicular to your vehicle
• Animals
Driving
150