BERTSCHAT HEATED SOLES, Руководство пользователя

Страница: 7 / 59

7
In the soles there are sensors that monitor the heat. When you have well insulated shoes, the soles will
require less energy to achieve the same result.
Tip: in due course, fully charge the soles three times, then use them without interruption until they are
completely empty. This could give an energy boost, giving them back the original power.
• Do the soles flash?
It is possible that the soles flash. This means that the battery has been discharged too deeply for a
longer period of time (this should always be prevented). A safety measure has occurred to protect the
battery. You can deactivate it by inserting the plug in the socket and remove it until the flashing has
stopped. Now, the battery will charge again.
FURTHER INSTRUCTIONS:
• Always switch off the soles after use.
• Remove both plugs from the soles if you are not using them.
• Store the soles and adapter in a cool and dry location.
• The soles may only be charged with the original charger.
• Keep the soles away from sharp or pointed objects.
• If the soles have become wet, only allow them to dry naturally and do not place them on the heating
or any other heat source.
• If the soles are damp, allow them to dry fully before charging.
WARNINGS
• The soles are not suitable for use by minors.
• Do not make any changes to the soles and/or battery, other than cutting the sole to size.
• In case of damage to battery or charger, stop using the product.
• When the battery swells up, immediately stop using it and contact the manufacturer.