Now take a screw clamp and tighten
the adjusted roof element at the roof
overhang (outside) and screw them
together from the left and right hand-
side. Place two small pieces of wood
underneath the clamp to protect the
wood.
Screw all pieces, one after the other,
on the outside. Make sure all roof sec-
tions are set properly on the wall ele-
ments.
If necessary, adjust the position of
the roof element with a hammer. After
screwing all roof areas on the outside,
the elements need to be aligned at
the top. Do this by pressing or gently
hammering from the outside (one per-
son on the roof). Screw all elements
together one by one.
Make sure the adjoining roof beams
are
fl
ush when adjusting the pieces.
Screw all roof elements together pro-
perly ant to the wall elements.
Contact your specialist supplier if you experience any problems during assembly.
5
