Berthoud VANTAGE E.C.TRONIC 28-30, Руководство пользователя, Страница: 35 / 46

82527 Vantage 35
5.4 CHECKS BEFORE THE SPRAYING SEASON
Check the tyre pressures:
Check the tightness of the wheel pins.
Filters:
Make sure of the good condition and
cleanliness of the suction and discharge filters.
TYPE OF
TYRE
PRESSURE IN BARS
KLEBER MICHELIN ALLIANCE
230/95 R44 3.6 4.3 4.3
230/95 R48 3.6 4.3 4.3
270/95 R48 4 4.3 4.3
300/95 R46
4.3 4.3 4.3
340/85 R38 1.9 1.9 1.9
380/85 R46 - - 4.2
420/85 R38 2 1.9 1.9
460/85 R38
2 1.9 1.9
Pipes: Search for any leaks and check the bends in
the pipes.
Seals and connectors: Check the tightness of the
nuts on the connections and change the seals if
necessary.
Pump, gearbox, angle transmission: Check the
levels of oil.
Nozzles:
Change the nozzles once a year or when
their flow becomes 10% to 15% greater than their
initial flow. For this, use the FLOW TEST BERTHOUD
reference 765.241 or the FLOW COMPARATOR
BERTHOUD reference 778.887.
Tank: Check that there are no foreign bodies in the
tank.
5.5 PERIODIC MAINTENANCE TABLE
5.3 CLOGGED NOZZLES
Clean and rinse the clogged nozzles using a brush
and water.
For this, use the key-brush reference BERTHOUD
779.354.
WARNING:
Never blow into a nozzle.
Inspection points
At each
treatment
Monthly
After
overwintering
Before
overwintering
Rinsing the tank
x x
Rinsing the spray circuit
x x x
Cleaning the suction filter
x x
Cleaning the discharge filter(s)
x x
Cleaning the nozzles
x
Checking the road signalling
x
Water-repellent product on the electrical sockets
x x x
Cleaning and greasing the transmissions (universal joint)
x (or maxi 50h) x x
Cleaning and checking the flowmeter
x x x
Condition of the cables
x x
Condition of the safety components
x x
Alignment of the nozzle holders and the nozzles
x x
Alignment of the arms of the boom
x x
Greasing the friction parts
x x
Greasing the articulation points
x
Level of oil in the pump
x
Tighten the wheel nuts
x
Check the pressure of the tyres
x
Clean the anti-drips
x
External cleaning
x
Check the flow of the nozzles
x
Check the anti-drips
x
Drain the pump
x
Drain the gearbox
x (or maxi 200h)
Check the pressure of the nitrogen ball (50 bars)
X