BERTHOLD TECHNOLOGIES LB4710-050 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 227

BERTHOLD TECHNOLOGIES LB4710-050 Скачать руководство пользователя страница 16

Chapter 2 Safety

Mini-Switch LB 471

16

Caution!

Radioactivity!
The radiation protection directives have to be observed.
Controlled areas outside the shielding have to be identified and
secured if they are accessible.

2.5.3

Monitoring Areas

Monitoring areas are operation areas which do not belong to the
controlled area. In these areas, a person may receive an effective
dose of more than 1 mSv in one calendar year.

The monitoring area starts at the controlled area. It is an area in
which persons staying permanently in this area may be exposed to
a  radiation  level  of  more  than  1 mSv  in  one  calendar  year.  For  a
stay of 40 hours per week and 50 weeks per year the area is be-
tween the dose rate limit values of 3 µSv/h and 0.5 µSv/h. It has
to  be  ensured  that  persons  are  not  exposed  to  a  dose  exceeding
1 mSv  per  year,  taking  into  account  the  actual  time  they  stay  in
this area. This means that no permanent work place may be set up
in this area.

«
...
14
15
16
17
18
...
»

Содержание LB4710-050




































































































































































































































Отзывы:

Нет отзывов