BERTHOLD TECHNOLOGIES LB 6775, Руководство по эксплуатации

Страница: 75 / 118

LB 6775 6 Operation
63039BA2, Rev. 01, 07/2018
75
Event List
System events are classified in
•
FAILURE (F)
•
OUT OF SPECIFICATION (S)
•
FUNCTION CHECK (C)
•
MAINTENANCE REQUIRED (M)
FAILURE (F)
Fatal device error. Usually, the current output is set to fault current.
Out of specification (S)
The detector, one of its components or the process itself, are out of normal speci-
fication.
Function Check (C)
Indicates that entries are made at the detector or a function check/simulation is
being performed.
(EVENT)Number Description Cause Action Class
F 101-106, F 202,
F 204-207, F 516,
F 517, F 600, F 700
System Failure Internal sys-
tem failure
Powercycle device.
If not successful per-
form factory reset. If
the event remains it
could be caused by a
defective hardware.
Contact BERTHOLD
service.
0 / 1
S 208, S 209 Temp. Sensor The temper-
ature sensor
on the main
board / on
the amplifier
board is not
working cor-
rectly.
Powercycle device. If
not successful per-
form factory reset. If
the event remains it
could be caused by a
defective hardware.
Contact Berthold ser-
vice.
3
S 210
Temperature
too high
Internal
Temperature
is high
Check ambient tem-
perature
3
F 211
Quartz syn-
chronization
Internal sys-
tem failure.
Powercycle device. If
not successful per-
form factory reset. If
the event remains it
could be caused by a
defective hardware.
Contact Berthold ser-
vice.
1