BERTHOLD TECHNOLOGIES LB 6775, Руководство по эксплуатации

Страница: 71 / 118

LB 6775 6 Operation
63039BA2, Rev. 01, 07/2018
71
Feedback Value [V] Actual measured output voltage 0 – 10 V.
Output Value [V] Calculated voltage to output 0 – 10 V (setpoint).
Error Value [V] Voltage outputted if failure is detected (0 | 10 V).
Error Mode Sets the voltage in case there is an error event detected.
0 = 0 V
1 = 10 V
U – I Selection 0 – 10 V (activate voltage output)
0 – 24 mA (activate current output)
Field Calibration
Calibration Test
Mode Activates/deactivates test mode of voltage loop. If
activated, the “Test Voltage” is output. (Reboot
deactivates test mode automatically).
0 = OFF
1 = ON
Calibration Test
Value Voltage outputted if test of Voltage Loop is activated.
Trim Offset (Cali-
bration) Voltage Loop calibration.
Trim Gain (Calibra-
tion) Voltage Loop calibration.
Upper Cal. Point Value measured with external voltmeter and usually
used for gain calibration of voltage loop.
Lower Cal. Point Value measured with external voltmeter and usually
used for offset calibration of voltage loop.