23
ENGLISH
INCIDENT
CAUSE
SOLUTION
A flashing symbol
E:1
appears
on the temperature display
(2) and an alarm sounds. The
oven has stopped heating up.
The oven door has not been
locked. The door lock has not
worked.
Touch any sensor to stop
the alarm. Call the Technical
Assistance Service.
A flashing symbol
E:1
appears
on the temperature display
(2) and an alarm sounds. The
oven has stopped heating up.
The door is locked but the
door lock indicator light (3)
does not light up.
Touch sensors
and (12) at
the same time and the door
should unlock. Call the
Technical Assistance Service.
A flashing symbol
E:2
appears
on the temperature display
(2) and an alarm sounds.
You have opened the door
before it has been locked.
Touch any sensor to stop
the alarm. You will see the
time left before the oven
can be used again on the
display (4). When the display
shows 0:00, close
the door before
programming the pyrolytic
function again.
A flashing symbol
E:3
appears
on the temperature display
(2) and an alarm sounds.
You have opened the door
during the pyrolytic function.
The door lock has not worked.
Call the Technical Assistance
Service - your oven is
operating in potentially
dangerous conditions.
The door should be locked
with the pyrolytic function.
A flashing symbol
E:4
appears
on the temperature display
(2) and an alarm sounds. You
will see that the door lock
indicator light (3) is on.
The door has been locked
without a pyrolytic cleaning
cycle being programmed.
Touch any sensor to stop
the alarm. The E4 symbol will
continue to flash
and the time remaining
until the door is unlocked will
be shown on the
display (4). After this time,
indicator light (3) will turn off
and you will be able
to open the door.
Touch any sensor to remove
the symbol E4. Call the
Technical Assistance Service.
