manualshive.com logo in svg

Bernina Q 20, Руководство пользователя

Поделиться
Скачать
Bernina Q 20 Скачать руководство пользователя страница 65

Care and maintenance

65

> Tap «Setup Pogram».

> Tap «Machine settings».

> Tap «Maintenance/updates».

> Tap «Updating firmware».

> To back up personal data and settings, tap «Save Data».

– Wait until the data has been backed up onto the USB stick.

NOTICE

Incomplete update due to removing the BERNINA USB stick too early

If the software has not been updated or has not been fully updated, the machine cannot be used.
> Remove the BERNINA USB stick only once the update has been successfully completed.

Update

Update

> To start the firmware update, tap «Starting firmware update».

– Wait until the firmware update has finished.

Starting the Service Programm

The Service Program allows the service technician to fix errors and to readjust individual functions.

Along with the diagnostic instructions in the service manual, the service program is accessible and usable for
diagnosis by the user and remote diagnosis. The BERNINA specialist dealer can check the functions and give
support for troubleshooting.

NOTICE

Wrong settings in Service Program

Impairment of the machine function.
> Carry out settings in the service program only under the guidance of the specialist dealer or have them

carried out by the specialist dealer.

> Password protected settings can only be carried out by the specialist dealer.

> Touch the icon «Home».

> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

> Touch the icon «Maintenance/Update».

Содержание Q 20





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды