Setting up the machine
25
> Select the required function for the back kick.
1
2
3
4
1
«No function»
3
«Raising/lowering the needle»
2
«Single stitch/securing»
4
«Raising/lowering the presser foot»
> Close the window.
–
The function will be programmed. With each back kick on the foot control, the selected function will
be carried out.
Using the single stitch/securing function with the foot control
The «Single stitch/securing» funciton combines the following functions:
• Pull the bobbin thread upward with a single stitch.
• Sew a programmed number of securing stitches.
Prerequisite:
•
The back kick is programmed with «Single stitch/securing». (see page 24)
> To pull the bobbin thread up with a single stitch, briefly tap the foot control with your heel.
> To sew the programmed number of securing stitches, press the foot control down with your heel until
the programmed securing stitches have been stitched.
Using the KickSstart function
The KickSstart function enables quilting without keeping the foot control pressed.
> In the sewing screen, select the desired mode, e.g. BSR1, and set the desired values, e.g. stitch length,
