manualshive.com logo in svg

Bernina Q 20, Руководство пользователя

Поделиться
Скачать
Bernina Q 20 Скачать руководство пользователя страница 55

Settings

55

> Tap «Dealer data».

> To enter the name of your specialist BERNINA dealer, tap «Name».
> Enter and confirm the name of the dealer.

> To enter the address of your specialist BERNINA dealer, tap «Address».
> Enter and confirm the address of the dealer.

> To enter the telephone number for your specialist BERNINA dealer, tap «Phone number».
> Enter and confirm the telephone number of the dealer.

> To enter the website or the e-mail address of your specialist BERNINA dealer, tap «E-mail address».
> Enter and confirm the IP address of the dealer.

3.15 Saving Service data

The service data regarding the current status of the machine can be saved on a USB stick and consequently
provided to the specialist BERNINA dealer.

> Insert the BERNINA USB stick (optional accessory) with enough free storage capacity into the machine's

USB slot.

> Tap «Home».

> Tap «Setup Pogram».

> Tap «Machine settings».

> Tap «Information».

> Tap «Service data».

> To save the service data, tap «Export the service data».

– While the data is being saved, the icon will appear dark with a white border.

> Once the icon appears gray again, remove the USB stick.

3.16 Restoring factory settings

> Tap «Home».

Содержание Q 20





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды