Bernina Q 16, Руководство пользователя

Страница: 70 / 78

Errors and faults
70
Fault Cause Remedy
Skipped stitches Incorrect needle system. > Use the 130/705H needle system.
The needle is bent or blunt. > Use a new BERNINA quality needle.
Needle substandard. > Use a new BERNINA quality batting.
The needle is incorrectly inserted. > Push the needle all the way to the top when inserting.
Incorrect needle point. > Match the needle point to the texture of the material.
Quilt sandwich pulled too tight. > Do not pull the quilt sandwich too tight.
Quilt sandwich with adhesive
fleece. > Use silicone lubrication.
Upper thread breaks Needle/thread ratio incorrect. > Match the needle with the thread size.
Upper thread is too tight. > Reduce the upper thread tension.
> Monitor the bobbin thread tension with the bobbin
thread tension gauge.
Not threaded properly. > Check the upper thread.
Substandard or old thread. > Use quality thread.
Stitch hole or hook tip damaged. > Get in contact with the specialist BERNINA dealer.
Lower thread breaks Bobbin thread tension too high. > Increase the upper thread tension, or adjust the bobbin
thread tension with the adjustment tool.
The stitch hole in the stitch plate
is damaged. > Get in contact with the specialist BERNINA dealer.
Needle blunt or bent. > Use a new needle.
Bobbin thread caught. > Check the bobbin thread.
Needle breaks Needle not properly secured. > Tighten the screw of the needle holder.
Substandard thread with knots. > Use quality thread.
Screen not responding Incorrect calibrating data. > Recalibrate the screen in the Setup Program.
ECO function switched on. > Switch off the ECO function.
Calibration screen cannot be
opened
Screen not responding. > Switch the machine off.
> Keep your finger on the screen.
> Switch on the machine while your finger is on the
screen.