Bernina Q 16, Руководство пользователя

Страница: 37 / 78

Setting up the machine
37
Prerequisite:
• The needle is in the upper position.
• The presser foot is raised. This is IMPORTANT so that the thread can be inserted between the thread
tension discs.
• The machine is switched on.
> Place the spool on the left vertical spool pin.
> Insert the thread first in the eyelet (1) positioned vertically above the spool and then in the front left
eyelet (2) of the thread guide.
> First, guide the thread on the left-hand side of the machine through an upper thread guide (3).
1
2
3
> Hold the thread above the thread guide with your left hand, pull it with your right hand in the direction
of the arrow through the thread guide (4) and guide it through the slot (5) above the service door to the
right-hand side of the machine.
5
4
> IMPORTANT : Check whether the presser foot has been raised and consequently whether the thread
tension discs have been opened.