Bernina Kaffe 770 QE PLUS Скачать руководство пользователя

Страница: 183 / 236

Errors and faults

181

Message on the display

Cause

Solution

The calibration of the Buttonhole
Foot with Slide #3A has failed.

> Check the presser foot for ease of movement. If

necessary, remove lint, dust and fabric remnants.

> Clean the reflector with a soft, slightly damp microfiber

cloth.

> Check the position of the reflector. If necessary, correct

the position of the reflector or replace the presser foot.

> Check the plastic on the underside of the presser foot

for signs of wear. Replace the presser foot if necessary.

> Clean the feed dog.
> If the error still occurs, contact specialized BERNINA

dealer.

18.2 Troubleshooting

Fault

Cause

Solution

Uneven stitch formation

Upper thread too tight or too
loose.

> Adjust the upper thread tension.
> Check the thread feed from the thread spool.

Needle blunt or bent.

> Replace the needle, make sure that a new BERNINA

quality needle is used.

Poor quality needle.

> Use a new BERNINA quality needle.

Poor quality thread.

> Use quality thread.

Incorrect needle/thread
combination.

> Match the needle with the thread size.

Incorrectly threaded.

> Rethread.

Fabric has been pulled.

> Feed the fabric evenly.

Uneven stitch formation

Incorrect bobbin case is used.

> Use the supplied bobbin case marked with the triangle.

Содержание Kaffe 770 QE PLUS













































































































































































































































Результаты поиска

Содержание Kaffe 770 QE PLUS

Отзывы:

Похожие инструкции для Kaffe 770 QE PLUS

Бренды по названию

Популярные бренды

Bernina Kaffe 770 QE PLUS, Руководство пользователя

Результаты поиска

Содержание Kaffe 770 QE PLUS

Отзывы:

Похожие инструкции для Kaffe 770 QE PLUS

Бренды по названию

Популярные бренды